When you shouldn't setup your guitar

OK. After the last one, which was a biggie, this one’s a bit shorter and sweeter. It’s still useful to know, though.

Sometimes a customer will drop their guitar in for a setup but I’ll recommend against it.

Say, what???

Sometimes I’ll advise that a customer not spend money on a setup.

Here’s why…

Why a guitar tech might recommend AGAINST having your guitar setup

I’ll usually do a bit of a basic assessment of the instrument while I’m talking to the owner. One of the things I’ll check is the condition of the frets. If I think the frets are worn or pitted too much, I know that a setup is frequently not a good idea.

Intonation issues

We’ve talked about this a few times before. The ‘intonation point’ on a worn fret gets shifted slightly (more here). Because all of the frets don’t wear evenly, it’s difficult to get a consistent intonation along the neck. Some players never notice this but many are more ‘pitch-sensitive’ and it bothers them (sometimes that’s even the reason they show up for a setup).

If I know that I can’t get the guitar to intonate as well as possible, I might recommend against forking out for a setup.

The dreaded buzz

As the frets wear, fret buzz can start to creep in. And, as I tweak the tolerances of action and relief, there’s a good chance that the fret wear will make itself more evident with an increased likelihood of fret buzz.

Now, I know that I often speak about a bit of fret buzz not being the end of the road and I stand by that. Two things, though: (a) sometimes fret wear makes buzz evident to the point that it’s too intrusive for most players, and (b) why spend money on a setup when there’s a good chance it will make your guitar buzz more?

Of course, it’s worth mentioning that I can setup a guitar to minimise that fret buzz.

But…

Since the majority of players don’t want me to raise their action during a setup, this route isn’t typically a runner. And the intonation issue still exists (it may even be worsened depending on action and relief settings).

Fret condition can have an impact on how well a guitar can be setup

So what do we do?

Don’t setup your guitar right now

If I don’t think there’s anything to be gained by setting up your guitar — or if I feel that you’ll actually be less happy after any setup work — I’ll recommend against it.

Usually what I’ll do is explain the fret wear situation and tell you that, right now, I don’t recommend a setup because you won’t get your money’s worth. I advise keeping the setup money and putting it towards sorting out the relevant fret work first (most of the the time that’s a fret level). Then the instrument can be setup well. I build in setup costs into all of my fret work so any fret job will include the relevant setup steps after the frets are in perfect shape.

Want more?

I send a (mostly) weekly newsletter full of great setup and repair info.

    I don't do spam and you can unsubscribe at any time. Read more at my Privacy Policy.

    The bottom line

    Sometimes a setup isn’t the right decision for a particular instrument. Sometimes your tech might recommend against a setup. Sometimes it’s necessary to address other issues first to get the best from that setup.

    That’s it.

    This article written by Gerry Hayes and first published at hazeguitars.com