This damned neck continues to task me, curse it. This time the tuner bushings are too small for the holes in the aftermarket neck. Let’s deal with that…
Read More
Last time we wrestled the neck into the pocket. Now we meet another common issue with aftermarket necks: Mismatched screw holes. Find out how to deal with this…
Read More
Fitting a new bolt-on neck should be a relatively straightforward process. However, sometimes necks can fight back a little. Check it out…
Read More
I talk (rant) a lot about using full-pocket shims when shimming a guitar neck. And, while you can certainly buy some for an easy life, if you’ve access to a 3D printer, it seems you can now print some.
Read More
You’re all set to unleash that blistering, shredtastic guitar solo but… NO! The neck’s too sticky. Your hand can’t move fast enough and the audience of guitarists have all raised their eyebrows in pedantic judgement. What can you do?
Read More
Last time we picked the correctly sized drill bit for the screw. Now we need to know how deep to drill. Check it out…
Read More
Let’s look at some basic tips here. If you’re drilling holes in a pickguard or a guitar, you want to be certain they’re the right size to accommodate the intended screw. Make sure…
Read More
Can you hear banjos? This lovely little banjo has a delaminating pot. Let’s see what we can do…
Read More
We can try to get incredibly precise when we’re setting up an instrument. How far should we go for good results, though? Check it out…
Read More
An annoying buzzing when playing an acoustic guitar can be tricky to pin down. Here’s an odd source of buzzing I’ve encountered on a number of occasions. Check it out…
Read More
Get to grips with Taylor’s ES2 pickup system. It’s a bit different.
Read More
Ivory was used on some guitars back in the day. Thankfully, these days, it’s mostly avoided. However, for vintage replacements—or vintage vibes—an alternative would be nice. Have we found one?
Read More